MXY CCD Systems
Camera Supported Drilling and Routing on Multiple Stations

The trend toward even smaller tools and thus closer tolerances requires a process to register the PCB surface. Here, for high-precision drilling or routing, the optical registration with the help of the CCD camera is established and accepted.

All types of the MXY series are equipped with CCD – camera. Individual linear motors for all axes at all stations provide high acceleration and a maximum speed with the highest accuracy

This combination of mechanical components and optical systems meets perfect the requirements of the current generations in the circuit board industry.

With the optical registration, different geometries can be used. The operator can choose between a circle, block or cross as a function.

Furthermore, the PCB can be registered as a complete panel or separated with the help of a multi-zone measuring for an individual calculation for higher accuracy in defined parts of the circuit board.

The data and the correction values of the panel can be stored centrally and being used later on for the drilling program. Corrections of the XY offset, shrinking or stretching and rotation can be identified and integrated as a correction value.

Typical Applications

  • Drilling spindles with up 300 krpm
  • Routing
  • Panels of up to a size of 600 x 660 mm


  • Linear motor for all axes at each spindle


  • offset, rotation, shrinking and stretching


  • Loader system
If you have any questions don’t hesitate to contact us directly
or by filling up the form below.

    (All fields are required)


    Feel free to contact us through
    the contact information written below.