Argus International spray coating technology has been proven superior to other methods of LPISM application. Our primary goal was to produce a spray system and a tack dry oven which could be linked through compatible conveyor systems to form a time and labor-efficient unit and to eliminate the handling of wet boards. A single, traversing spray head also increases efficiency by reducing setup time, and decreasing both machine cost and maintenance. HVLP-Heated Gun Technology allows use of high-solids LPISM for increased efficiency and minimized environmental impact.
Argus drying technology provides a major breakthrough in reduction of tack dry time. Typical convection systems require 35 to 45 minutes to tack dry LPISM coatings; the 9724 3 Zone Tackdry Oven reduces this to 3 or 4 minutes and 9724 5 Zone Final Cure Oven reduces final cure time to 6 or 7 minutes.
The Argus International PC9000 Product Line, consists of a Double Sided LPISM Spray Application System and a 3 Zone Tackdry Oven.
The following table summarizes each:
| Model | 9524S Single Side | 9524D Double Side | 9724×3 | 9724×5 |
| Function | LPISM Application | LPISM Application | IR Tackdry | IR Tackdry/Final cure |
| Major Feature | Heated Spray-Gun Technology | Heated Spray-Gun Technology | Under 4 Minutes TackDry Time | Under 7 Minutes Final Cure Time |
| Throughput 24 x 24” | Up to 120 panels per hour | Up to 120 panels per hour | Up to 120 panels per hour | Up to 120 panels per hour |
| Panel size 6-24 inches | 24” wide by any supported length | 24” wide by any supported length | 24” wide by any supported length | 24” wide by any supported length |
or by filling up the form below.
the contact information written below.