Copper Core Plating Racks

M+B’s most widely sold racks are the Copper Core Racks. M+B has always believed that a copper to copper connection was ideal for plating PCB’s. Less resistance for the current, results in better plating throughout the board.

Whether coated with Polypropylene or Halar, our vertical copper core racks offer an optimal plating distribution by providing several contact points from the top of the panel to the bottom. These are also ideal racks for plating flex or rigid-flex panels as they keep the board tightly fastened in place from both sides.

These racks can be made with or without a handle depending on if it is a manual or automatic plating line.


  • Line Type: Automatic or Manual Lines
  • Used For: electrolytic processes
  • Contact: Copper or Stainless Steel
  • Coating on rack: Polypropylene or Halar


  1. Copper core provides excellent passage for current. Very little resistance
  2. Provide more contact points along the sides of the board, for a more even plating distribution
  3. Can be used in manual or automatic lines
  4. Can hold multiple panels on the same rack if needed
  5. Ideal for flex or rigid-flex panels
If you have any questions don’t hesitate to contact us directly
or by filling up the form below.

    (All fields are required)


    Feel free to contact us through
    the contact information written below.